- The fishing rod switches to its cast model while its hook is out
(FishingRodCast), in first person, third person and the hotbar.
- FishingHook.catchingFish's particles: splashes where fish tease the bait,
the fishing-particle trail and bubbles of a fish swimming up, and the
bubble and fishing burst when it bites.
- FishingHookRenderer: the line is 16 black `lines` segments of the window's
line width (2.5 px at 1080p) from a quarter block above the hook to the
rod hand (on the near plane in first person, beside the body in third),
and the bobber is centred on the hook.
Fixes#265
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Changes to horizon-core or horizon-world make ~280-300 harnesses rerun, which takes
60-90 min on the Mac mini runners; at 45 min those runs were cancelled and proved nothing
(#269, #280, #292 today).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The autosave queued its chunks without waiting (#284), then saved the
entities with the waiting call. The region writer is one FIFO thread,
so the main thread still waited for every chunk queued before the
entities: a 1.9 s frame at the 5-minute autosave on a world with ~900
columns. Like PersistentEntitySectionManager.autoSave (saveAll's flush
only on save-all and quit), the autosave now queues the entities too.
Part of #224
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
FireworkEntityRenderer submits the rocket's item in the GROUND context,
turned to the camera (and over on its side when shot at an angle), at the
packed light of its eye. Horizon drew a flat 0.5-block sprite at full
brightness, so rockets glowed at night and had no item shading.
Fixes#279
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Options.cutoutLeaves, ambientOcclusion and biomeBlendRadius call
LevelExtractor.allChanged when they change. Horizon only handed the new
value to the mesher, so after turning See-Through Leaves off the loaded
sections kept their see-through leaves, pale against the sky, beside the
opaque ones of sections rebuilt later.
Fixes#273
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Vanilla 26.3's Projection passes its planes reversed and every pipeline
tests GREATER_THAN_OR_EQUAL. Horizon kept forward depth with a 0.05 near
plane, so far geometry lost precision and fire_side's quad, 0.01 pixel in
front of the block it burns on, z-fought with it.
Fixes#272
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
BeehiveBlockEntity (crate::beehive): up to three bees stored as entity
tags, out when their time is up (not at night, in the rain or through a
blocked front unless in an emergency), honey for nectar, the flower they
knew; vanilla's bees / flower_pos save format. Bees find a hive with room
(BeeLocateHiveGoal), fly home and go in (BeeEnterHiveGoal through
MobEvent::EnterHive). In the game hives tick, breaking one lets the bees
out angry unless smoked, fire empties it, dispensers release them.
mob_ai: bee_hive_night, _rain, _morning and _honey match vanilla.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
arrows::tick never set the projectile's previous position (Entity.setOldPosAndRot
at the start of every tick); Projectile::tick does, but arrows don't go
through it. The renderer lerped from the spawn point to the current
position every frame, so a flying or stuck arrow jumped along its whole
path. The arrow harness now prints the old position too.
Fixes#278
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The oracle started a scenario once hasLightWork() had been false for six
ticks, but light updates reach the light thread through the chunk task
dispatcher, where hasLightWork() can't see them. A drowned's first
sun-burn roll (Mob.isSunBurnTick draws only when the brightness at its
eyes is above 0.5) then read the dirt's light under a freshly filled
pool or the water's, depending on thread timing: one random draw more or
less, and drowned_pool / drowned_pool_swimmer failed at random.
Queue ThreadedLevelLightEngine.waitForPendingTasks on every forced chunk
after building the scene and tick only once they have all completed.
Fixes#290
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A port of vanilla 26.3 Bee: FlyingMoveControl and flying navigation,
hover wandering, flower search and pollination (nectar), growing crops,
tempting and breeding, persistent anger with the hurt-by alert, the sting
(poison, stinger lost, later death), drowning, staying home at night and
in rain, roll, textures and NBT. Hives as homes are not simulated yet.
FlyingMoveControl clamps the pitch like Entity.setXRot, so a rotlerp
that wraps to 359 gives 90 as in vanilla.
Mob AI parity: 9 bee scenarios, 3609/3609 ticks; full harness 120/120.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Bats fell into the generic fallback AI and walked like land animals; their
animation states were never started. Port vanilla Bat: hanging from a solid
block until a player comes within 4 blocks or the block goes, the take-off
level event, customServerAiStep's flight towards random nearby air, Bat.tick
(held to the ceiling while resting, vertical speed scaled by 0.6 in flight),
setupAnimationStates (flying and resting keyframes), waking when hurt,
BatFlags in the save, no fall damage, movement events without sounds, the
lower voice pitch, and no omnidirectional air drag (vanilla gives that only
to bees, parrots and sulfur cubes).
Mob AI parity harness: six bat scenarios, 6/6 match (1906/1906 mob-ticks).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Striders fell into the generic fallback AI, whose FloatGoal jumped them
up and down in lava. Port vanilla Strider: its goals (no FloatGoal,
StriderGoToLavaGoal, RandomStrollGoal every 60 ticks, LookAtPlayerGoal for
striders), floatStrider, standing on lava sources through the living
collision context and the half-block liquid shape, travelling in air where
lava holds it up, StriderPathNavigation's lava destinations, the walk target
value, going cold (suffocating speed modifier, cold texture) away from warm
blocks, the happy/retreat sounds and a lava-proof checkFallDamage.
Mobs now keep Entity.mainSupportingBlockPos from their last move, as
getBlockStateOnLegacy reads it.
Mob AI parity harness: five strider scenarios, 5/5 match (1105/1105
mob-ticks; 0/5 and 5/1105 before).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Mob.readAdditionalSaveData assigns persistenceRequired from the tag,
overriding the constructor's setPersistenceRequired (copper golems,
elder guardians). Horizon ORed it in, so a copper golem vanilla saved
with 0 came back with 1. The monument's elder guardian, which Horizon
builds from NBT where vanilla calls the constructor, now carries the
flag in its spawn NBT.
Fixes#289
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Generation asked for columns within the view distance + 3 or two of a
finished chunk, but a column that came back finished (loaded from the
save) was kept only within + 2 or one of a finished chunk. After a
teleport, saved columns in between were loaded, dropped, asked for and
loaded again on every frame, forever: 8 of them at render distance 16
held 8 of the 39 in-flight generation slots and kept the disk and a
worker busy. The requested, kept and unloaded ranges now live in Ranges
and nest; requested_columns_stay_loaded checks it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On macOS the Horizon client renders offscreen (--offscreen) with audio off,
from the logged-in session; Linux keeps vscreen and the null ALSA device.
The vanilla side was already a headless dedicated server. --bin-dir is
resolved, since the client runs from the run folder. parity.py no longer
skips save_roundtrip off Linux; it stays local-only (no rendering over SSH).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new chunk relights its eight neighbours, and every finished light job
dirties all sections of the 3x3 columns around it. Meshing waited only for
the column itself to be lit, so sections near the loading frontier were
meshed with half-settled light and again after each neighbour's relight:
about 2.25 meshes per section while a world loads. Wait until no column of the
3x3 is being lit or queued for light. The final meshes are the same; they are
built once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Same rule as perf_bench: with status.streaming, the last sections are drawn
once no stage has held work for half a second, so the remeshing that
follows a load (fluids settling, random ticks) isn't counted as loading.
Without it, meshing still has to go quiet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Builds that report status.streaming are loaded once chunk counts are
stable and no stage (generation, decoration, light, meshing) has held work
for half a second. Meshing going quiet also waited through the remeshing
that follows a load (fluids settling, random ticks: 1500 falling to 60
meshes/s for ~150 s at RD16), which is simulation, not loading. Older
builds keep the meshing-rate rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>