The crystals were a hand-built mesh without normals (so unshaded), without
the bedrock base and without beams. They now draw the baked
minecraft:end_crystal#main layer under EndCrystalRenderer's transform
(scale 2, down 0.5, not flipped) with EndCrystalModel.setupAnim's poses
(end_crystal::poses: the base shown per showsBottom, the glass raised by
half the bob, outer glass, inner glass and cube turned with rotateBy), the
entity light at their block, and the beam to their target
(submitCrystalBeams from the target's centre up to the crystal) while the
spikes are being summoned back. Crystals placed outside the End draw too.
The entity model harness no longer skips end_crystal: the oracle runs
EndCrystalModel.setupAnim on EndCrystalRenderState and the fixture poses
the layer with end_crystal::poses.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hud.extractCrosshair draws every crosshair sprite with
RenderPipelines.CROSSHAIR, whose BlendFunction.INVERT (ONE_MINUS_DST_COLOR,
ONE_MINUS_SRC_COLOR, ONE, ZERO) inverts the colour under it; Horizon drew it
alpha-blended white. GuiDraw sprites now carry their pipeline, the HUD batch
records the vertex ranges that invert and the HUD renderer draws them with a
second pipeline.
The attack indicator (crosshair or hotbar, per the Attack Indicator option)
now shows Player.getAttackStrengthScale(0) from the attack strength ticker
instead of a constant full strength, and the full indicator shows at full
strength on a living entity under the crosshair with a weapon slower than
MIN_CROSSHAIR_ATTACK_SPEED.
The HUD harness records every sprite's pipeline on both sides and gives the
crosshair a stand-in crosshairPickEntity (alive or not) and attack delay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The host sends Creeper.DATA_SWELL_DIR and DATA_IS_IGNITED with the
creeper's entity data, and a guest runs the client half of Creeper.tick
on them, so the swell and white flash CreeperRenderer draws now show on
the guest too. Creeper.readAdditionalSaveData's ignited lights the fuse
(summon creeper ~ ~ ~ {ignited:1b}).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Players could never pick up arrows: arrows had no pickup rule and no
item, nothing checked a player touching them, and arrows from saves were
loaded into a separate list that never ticked.
Arrows now carry AbstractArrow's pickup rule and pickupItemStack. The
player's bow and crossbow give them the drawn ammo (ProjectileWeaponItem
.useAmmo: creative, Infinity and multishot's extra arrows draw intangible
ammo, so those arrows are CREATIVE_ONLY), setOwner(player) turns
DISALLOWED into ALLOWED, dispensers make them ALLOWED, mobs' stay
DISALLOWED. Each tick the player touches the arrows in its box grown by
(1, 0.5, 1) (Player.aiStep): a stuck arrow that has stopped shaking goes
into the inventory (ALLOWED), or just goes for a creative player
(CREATIVE_ONLY, or ALLOWED with a full inventory), with the item pickup
sound at the arrow.
Saved arrows load as live arrows (life, shake, inGround, inBlockState,
pickup, item, fire) and live arrows are saved, so stuck arrows survive a
reload and despawn on time; the legacy never-ticked arrow list is gone,
and /kill, /tp and /data reach the live arrows.
The arrow harness adds who shot the arrow, intangible ammo and
dispensers' ALLOWED, then touches in flight, while shaking and when stuck
by survival and creative players with empty, partly and fully filled
inventories, against the real setOwner and playerTouch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Arrows never caught fire: nothing ignited them (lava, fire blocks, a
Flame bow's projectile_spawned ignite), so they never set mobs, TNT,
campfires or candles alight. Flame only worked for mobs' bows, as a
5-second ignite on hit.
Arrows now keep Entity.remainingFireTicks: the blocks along their path go
through InsideBlockEffectApplier.StepBasedCollector (fire and soul fire
fireIgnite to 8 s, lava LAVA_IGNITE to 15 s, water EXTINGUISH with the
extinguish sound), the player's bow and mobs' bonus ignite them for 100 s
at spawn, and the fire burns down in flight but not while stuck. A
burning arrow sets its target alight for 5 s, primes TNT, lights
campfires, candles and candle cakes (onProjectileHit, mob_griefing for
mobs' arrows), and blows up a TNT minecart; arrows now hit minecarts like
other entities (VehicleEntity damage). Burning arrows show
FlameFeatureRenderer's fire quads.
The arrow harness adds lava pools, lava/water walls, fire and soul fire,
Flame arrows, and burning/non-burning hits on TNT, campfires, candles and
candle cakes against the real blocks' onProjectileHit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Arrows flew through water with a point check for the 0.6 drag and nothing
else: no bubbles, no splash, no currents, no bubble columns, and the
stuck arrow logic (nudging back by the normalized motion, no falling
out, a 1200-tick age) was not AbstractArrow's.
Port AbstractArrow.tick for arrows (arrows.rs, state in
Projectile::arrow): the in-block check, the water inertia from the last
base tick's wasTouchingWater with four bubbles behind it, crit trails,
lerped rotation, the COLLIDER clip with entity hits first, the effects
of the blocks along the path (bubble columns push, water extinguishes),
air drag and gravity, then the base tick's updateFluidInteraction
(currents while not stuck, splash sound/particles), sticking 0.05 back
along each moving axis with the arrow's own random for the hit sound,
falling out when the block goes, and despawning 1200 ticks after
sticking.
New harness tools/test_arrow_parity.py drives real vanilla Arrow entities
(VanillaArrowOracle) and Horizon's arrows::tick (examples/arrow_probe.rs)
over the resident scene.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The player's movement treated every fluid as empty: is_in_water was
always false, LivingEntity.checkFallDamage's updateFluidInteraction was
a no-op and Entity.move's fall-reset ray ignored water. A player landing
in water (or a waterlogged block, a bubble column, kelp) still took the
whole fall.
Bind vanilla's Entity.updateFluidInteraction to the player over the
existing horizon-world kernels (EntityFluidInteraction heights, eyes and
currents, entity_fluid_tick, water_splash, fluid_flow): run it in the
base tick and from checkFallDamage, read wasTouchingWater for
isInWater, query the water's (first-query cached) shape in the
FALLDAMAGE_RESETTING ray, halve the fall in lava after the first tick,
and play the splash sound with bubble and splash particles.
The scene motion harness gains water/lava fixtures (fluid_tick plus
scripted falls through the real Entity.move) against the real vanilla
updateFluidInteraction with the #water/#lava tags bound.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Classifies the online-mode login outcomes from #161: invalid session,
banned from playing online, multiplayer disabled, no account signed in
and the server failing to verify the username are never retried;
unreachable session servers (the client's or the server's) are. A retry
of an online-mode server joins with the account held in memory for the
whole run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On the Disconnected screen after a lost multiplayer connection, a
countdown "Reconnecting in N s" with a Cancel button, then the same
address again. Attempts back off (5, 10, 20, 40, 60 s) and stop after
five; the count resets only after a minute connected. Only failed
connections and the server's shutdown, restart, time-out or full
reasons are retried, never kicks, bans, whitelists, version refusals or
duplicate logins: the network thread now says whether the server gave
the reason (login refusals included).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The player's movement treated every fluid as empty: is_in_water was
always false, LivingEntity.checkFallDamage's updateFluidInteraction was
a no-op and Entity.move's fall-reset ray ignored water. A player landing
in water (or a waterlogged block, a bubble column, kelp) still took the
whole fall.
Bind vanilla's Entity.updateFluidInteraction to the player over the
existing horizon-world kernels (EntityFluidInteraction heights, eyes and
currents, entity_fluid_tick, water_splash, fluid_flow): run it in the
base tick and from checkFallDamage, read wasTouchingWater for
isInWater, query the water's (first-query cached) shape in the
FALLDAMAGE_RESETTING ray, halve the fall in lava after the first tick,
and play the splash sound with bubble and splash particles.
The scene motion harness gains water/lava fixtures (fluid_tick plus
scripted falls through the real Entity.move) against the real vanilla
updateFluidInteraction with the #water/#lava tags bound.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>